When you are looking for highly requested NSN parts, aerospace parts, military and defense parts, and other similar items that trace back to leading manufacturers that you can trust, look no further than Military Supply Chain. We appreciate your interest in part number 3416-1205-1033, a Federal Specifications product we have in stock that is listed alongside the NSN 3416001749171 and the description “Lathe Engine.” If you would like to learn more about part number 3416-1205-1033, be sure to fill out and submit the form provided on this page. Within 15 minutes or less, a member of our staff will contact you to present customized pricing and fulfillment options for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
For your convenience, we list items like part number 3416-1205-1033 with all applicable designations. For instance, this item is listed alongside the NSN 3416-00-174-9171, and is categorized under Federal Supply Class (FSC) 3416 Lathes. We also carry out testing, inspections, and document verification for much of our inventory, allowing us to guarantee fit, form, and function. With all of this in mind, begin the procurement process for Federal Specifications part number 3416-1205-1033 from CAGE Code 81348 on our website, and see why so many customers routinely rely on Military Supply Chain for their needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | Special Features | 2 HOLDER,LATHE TOOL,CUTTING OFF,STRAIGHT 3/8 BY 7/8 IN.SHANK,F/3/32 BY 5/8 IN.BLADE,TURNING,OFFSET,LH,3/8 BY 7/8 IN.SHANK,F/1/4 BY 1/4 IN.BIT;2 INDIC.,THREAD DIAL;2 KNURLING TOOL,REVOLVING HEAD,3/8 BY 7/8 BY 5-1/2 IN.SHANK,W/3 PR KNURLS DIAMOND SHAPE,FINE,MED.,COARSE 2 POST,TOOL,TO ACCOMMODATE 3/8 BY 7/8 IN.SHANK;2 REST,CPD.GRAD.,FOLLOWER,STEADY;2 SLEEVE,LATHE,H/STOCK SPINDLE;2 STOP,CARRIAGE,MICROMETER,THREAD CUTTING,ADJUSTABLE;2 SWITCH,208V,3 POS.START,STOP,REV.;2 TAPER ATTACHMENT,TELESCOPIC,LATHE" |
| ACDC | Current Type | AC |
| APGF | Design Type | SCREW |
| AWHA | Bed Type | SOLID |
| AWLX | Electric Motor Quantity | 1 |
| AAXX | Mounting Type | BENCH |
| ASHK | Electric Motor Horsepower Rating | 0.75 |
| ADQR | Center To Center Distance | 33.750 INCHES NOMINAL |
| ELEC | Voltage In Volts | 220.0 AND 440.0 |
| AGLD | Performance Type | STANDARD DUTY |
| FAAZ | Phase | THREE |
| BTSZ | Spindle Speed Quantity | 12 |
| BTTB | Spindle Speed Range In Rpm | +55.0 TO 1400.0 |
| BTTD | Rated Swing | 10.000 INCHES NOMINAL |
| BTTF | Actual Swing Over Bed | 10.125 INCHES NOMINAL |
| AKSL | Purpose For Which Designed | GENERAL |
| BTTG | Swing Over Cross Slide | 5.750 INCHES NOMINAL |
| BTWB | Thread Change Quantity | 48 |
| BTWL | Headstock Drive Type | STEP CONE PULLEY, BACK GEARED" |
| AKYD | Accessory Components And Quantity | 2 BELT,FLAT,V-DR.;1 BENCH-LATHE;1BIT,LATHE TOOL HOLDER,HIGH SPEED STEEL,BORING,3/16BY3/16IN.TURNING 1/4BY1/4IN.;2 BLADE LATHE TOOL HOLDER,CUT OFF,HIGH SPEED STEEL,3/32BY5/8 IN.;2 CTR.,LATHE,PIPE,1/2BY 3 IN.;2 CTR.,LATHE,60 DEG.NO.2 MORSE TAPER;2 CHUCK,DRILL,3 JAW,0 TO 1/2 IN.;2 CHUCK,LATHE,FITTED,IND.,4 JAW,REV.,8 IN.,UNIV.,3 JAW,W/2 SETS JAWS,1 SET INTERNAL,1 SET EXT.,6 IN.;2 COLLET,SPLIT,F/ROUND WORK,1/16,1/8,3/16,1/4,5/16,3/8,7/16,1/2,9/16,5/8,11/16,3/4,7/8,1 IN.;2 COLLET ATTACHMENT,H/WHEEL TYPE,1/16 TO 1 IN.;2 CUTTING ATTACHMENT,MILLING AND KEYWAY;2 LATHE,BENT TAIL,SINGLE SCREW,SINGLE,3/8,3/4,1-1/4,1-1/2,2-1/2 IN.;2 FACE PLATE,5-5/8,8-3/8 IN.;2 SET GEARS,METRIC TRANSPOSING,ENG.GRAD.;2 HOLDER,LATHE TOOL,TURNING,STRAIGHT,3/8 BY 7/8 IN.SHANK FOR 1/4 BY 1/4 IN.BIT,BORING,3/8 BY 7/8 IN.SHANK,COMP.W/9/16 IN.BAR AND 30,45,90 DEG.END CAPS FOR 3/16 IN.BITS,CUTTING OFF,RH,3/8 BY 7/8 IN.SHANK,F/3/32 BY 5/8 IN.BLADE" |
| BTWM | Headstock Center Taper Size Designator | 2 ASA STANDARD |
| BTYP | Hole Diameter Through Spindle | 1.375 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| FREQ | Frequency In Hertz | 60.0 |
| BTYW | Gear Change Type | QUICK |
| BTZR | Thread Quantity Range | +4.0 TO 80.0 PER INCH |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
