When you are looking for highly requested NSN parts, aerospace parts, military and defense parts, and other similar items that trace back to leading manufacturers that you can trust, look no further than Military Supply Chain. We appreciate your interest in part number 388X, a Clarostat Sensors And Controls product we have in stock that is listed alongside the NSN 5905012701697 and the description “Resistor Variable Nonwire Wound.” If you would like to learn more about part number 388X, be sure to fill out and submit the form provided on this page. Within 15 minutes or less, a member of our staff will contact you to present customized pricing and fulfillment options for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
For your convenience, we list items like part number 388X with all applicable designations. For instance, this item is listed alongside the NSN 5905-01-270-1697, and is categorized under Federal Supply Class (FSC) 5905 Resistors. We also carry out testing, inspections, and document verification for much of our inventory, allowing us to guarantee fit, form, and function. With all of this in mind, begin the procurement process for Clarostat Sensors And Controls part number 388X from CAGE Code 12697 on our website, and see why so many customers routinely rely on Military Supply Chain for their needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-270-1697 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 012701697 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 388X | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.109 INCHES NOMINAL |
| ABJT | TERMINAL LENGTH | 0.350 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.125 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.625 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.484 INCHES NOMINAL |
| ADAS | BODY INSIDE DIAMETER | 0.077 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.500 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,HOLLOWED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 265.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 4.50 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 4.50 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.250 INCHES NOMINAL |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | 0.0 TO 5.5-55 DEG CELSIUS SINGLE SECTION AND 0.0 TO 4.0-40 DEG CELSIUS SINGLE SECTION AND 0.0 TO 2.0 0 DEG CELSIUS SINGLE SECTION AND-2.5 TO 2.5 85 DEG CELSIUS SINGLE SECTION AND-3.0 TO 3.0 105 DEG CELSIUS SINGLE SECTION AND-4.0 TO |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 12 OCLOCK |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| CXHN | SHAFT BEARING TYPE | SLEEVE |
| FEAT | SPECIAL FEATURES | HOLE THROUGH SHAFT CONTINUES TO BACK OF CASE,MUST BE ABLE TO ACCEPT A 0.077 MAXIUM DIAMETER SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
